COURSE FINDER

CPCS Training (A59) - 360 Degree Excavator/Digger Course above 10 tonnes - Experienced Worker

£1060 per delegate. This may be less for special offers on specific course dates and in-company training courses

Duration: 2 days

Trainer: T799TA

Need course dates or locations to suit you? CLICK HERE TO SEND ENQUIRY...

Who Should Attend

This is a 360 Excavator(above or below 10 tonnes with lifting ops) course that is suitable for experienced operators who have knowledge and practical experience but would benefit from some training before attempting the theory and practical tests for CPCS Trained Operator Card. (Red Card).

Aims and Objectives

To ensure you have a thorough understanding of the relevant operational and safety requirements applicable to 360 Excavator above or below 10 tonnes with lifting ops working in the construction industry and allied environments in accordance with CITB recommendations.

Course Content: 

Upon successful completion of the course, an individual with a 360 excavator will be able to:
- Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
- Name and explain the purpose of principle components, the basic construction, controls and terminology.
- Confirm with Manufacturer’s requirements as per the operator’s handbook, other types of information source and the relevant regulations and legislation.
- Undertake all pre-use checks.
- Configure and ready for travel (site and highway – where applicable).
- Travel over rough, undulating ground, steep inclines and level surfaces.
- Manoeuvre in confined spaces.
- Configure and set for excavating duties.
- Explain actions required for hazards, underground and overhead services.
- Excavate differing types of excavations in various types of ground.
- Grade, spread and level ground and materials.
- Place materials into transporting vehicles and hoppers.
- Attach and remove buckets.
- Lift, move and place basic slung loads.
- Carry out shut down and securing procedures.
- Explain the loading and unloading procedures for machine transporting.

Pre-Requisites

Delegates must have passed the Health, Safety and Environment test within the past 2 years before booking onto a CPCS Technical Test.

On the Day

All visitors must report to reception on arrival at the time specified and follow site safety rules at all times.

Tea and Coffee are available free of charge, but there is no other catering facility on site, so delegates need to provide any further refreshments/meals they may need throughout the day.
Candidates must bring and wear their own 3 point PPE on site for plant testing. They must also bring signature and photographic identification as required for all testing.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Method

Training: The course is centred around the practical test and clients will be given maximum time training on the machine they will use in the test, from 8.30 am – 4 pm. Support will be given with the theory questions if needed, but we would anticipate clients will have revised for the theory prior to arriving at the centre. (Full details of both theory questions and practical test specs are available from CITB website.)

Test: You will be tested with a theory and practical test using CPCS standards. To attain the Red Card you must pass both the theory and practical tests.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Examination Board:

The Construction Plant Competence Scheme (CPCS) is recognised by the UK Contractors Group (UKCG) and Major Home Builders Group (MHBG) as the preferred card to comply with codes of practice for competence and certification. It was launched in 2003 to help them comply with regulations and requirements and aims to apply common standards for all plant operators.
CPCS is owned by the Construction Industry Training Board (otherwise known as CITB).

Outcome

On successfully completing the test you will receive a Red CPCS Trained Operator card that is valid for 2 years.

During these 2 years you must work towards achieving your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card.


Telephone Hotline 01933 233884

Enter a location to find distance

Location Region Start Date Days Price ex. VAT    
Hereford Midlands, South West, Wales Mon 11 Mar 24

This course runs over two consecutive days, start date as indicated.

2 £1060 + VAT BOOK ENQUIRE
Hereford Midlands, South West, Wales Mon 8 Apr 24

This course runs over two consecutive days, start date as indicated.

2 £1060 + VAT BOOK ENQUIRE
Hereford Midlands, South West, Wales Mon 22 Apr 24

This course runs over two consecutive days, start date as indicated.

2 £1060 + VAT BOOK ENQUIRE
Hereford Midlands, South West, Wales Mon 13 May 24

This course runs over two consecutive days, start date as indicated.

2 £1060 + VAT BOOK ENQUIRE
Hereford Midlands, South West, Wales Mon 20 May 24

This course runs over two consecutive days, start date as indicated.

2 £1060 + VAT BOOK ENQUIRE
Courses found 1 to 5 of 5 1
  • Corps Construct Logo
  • Common Sense Logo
  • GFT Logo
  • Samten Consulting Logo
  • Universal Construction Logo
  • 1UPACCESS Logo
  • BAM Construction Training Logo
  • Citrus Training Logo
  • 3B Training Logo
  • Construction Industry Training Providers Logo
  • Health Life and Safety Logo
  • MI Construction Training Logo
  • Innov8 Training Logo
  • BSI Training Logo
  • OM Safety Training Logo
  • TotalComms Training Logo
  • SDA Safety Logo
  • Construction Skills People Logo
  • Phoenix Health and Safety Logo
  • Harris Safety Training Logo
  • First Response Training Logo
  • Alliance Learning Logo
  • ALS Safety Logo
  • KeyOstas Logo
  • Libben Health and Safety Logo
  • Global Management Academy Logo
  • CCAS Health and Safety Logo
  • ROSPA Logo
  • PJH Safety Training Logo
  • OMS Logo
  • Tala Training Logo
  • PRS Health and Safety Training
  • SSG Training and Consultancy Logo
  • RB Services Logo
  • Safety Training Services Logo
  • Clarkson Evans Training Logo
  • Lighthouse Training Logo
  • The Building Safety Group Logo
  • Total Training Solutions Logo
  • Kentec Training Logo
  • Total Electrical Training logo
  • NTSS logo
  • Frinton Training logo
  • Envesca logo
  • The Safety Maintenance Company logo
  • APT Health and Safety logo
  • PC Workshops logo
  • Zero Harm Training logo
  • R2 Training logo
  • The Bradley Group logo
  • Risk Health and Safety logo
  • Wise Global Training logo
  • Total Training Company Logo
  • Sibbald Training logo
  • Total Construction Training logo
  • UTN Training logo
  • Collective Safety Solutions logo
  • GreEnergy Logo
  • RRC International Logo
  • JJH Logo
  • SaFA Logo
Telephone Hotline (footer image)

Telephone Hotline

01933 233884

(Monday to Friday - 8:00am to 5:30pm).

© 2024 Book My Course Limited. All rights reserved

Home | About Us | Contact Us | FAQs | Privacy Policy | Terms & Conditions | Site Map | News / Articles | Cookie Policy