COURSE FINDER

CPCS Training (A31) - Ride on Roller Course - Foundation/Novice

£1115 per delegate. This may be less for special offers on specific course dates and in-company training courses

Duration: 3 days

Trainer: T799TA

Need course dates or locations to suit you? CLICK HERE TO SEND ENQUIRY...

Aims and Objectives


To ensure you have a thorough understanding of the relevant operational and safety requirements applicable to Ride on Rollers, working in the construction industry and allied environments in accordance with CITB recommendations.

- Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
- Name and explain the purpose of principal components, the basic construction, controls and terminology.
- Confirm with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation.
- Undertake all pre-use checks.
- Configure and set for travel.
- Travel over rough, undulating ground, substantial inclines and level surfaces.
- Manoeuvre in confined spaces.
- Configure and set for compacting duties.
- Explain action required for hazards, underground and overhead services.
- Compact loose granular materials to specification.
- Compact straight lines and around radii.
- Compact supported and unsupported edges.
- Explain the principles, requirements and techniques of good compaction.
- Carry out shut down and securing procedures.
- Explain the loading and unloading procedures for machine transporting.

Pre-Requisites

Delegates must have passed the Health, Safety and Environment test within the past 2 years before booking onto a CPCS Technical Test.

On the Day

All visitors must report to reception on arrival at the time specified and follow site safety rules at all times.

Teas and coffees are available free of charge, but there is no other catering facility on site, so delegates need to provide any further refreshments/meals they may require throughout the day.

Candidates must bring and wear their own 3 point PPE on site for plant testing. They must also bring signature and photographic identification as required for all testing.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Method

Training: The course is centred around the practical test and clients will be given maximum time having full use of the machine you are going to use in the test from 8 am till at least 4 pm. Support will be given if needed with the theory questions, but we would anticipate clients will have revised for the theory prior to arriving at the centre. (Full details of both theory questions and practical test specs are available from CITB website.)

Test: You will be tested with a theory and practical test using CPCS standards. To attain the Red Card you must pass both the theory and practical tests.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Examination Board:

The Construction Plant Competence Scheme (CPCS) is recognised by the UK Contractors Group (UKCG) and Major Home Builders Group (MHBG) as the preferred card to comply with codes of practice for competence and certification. It was launched in 2003 to help them comply with regulations and requirements and aims to apply common standards for all plant operators.
CPCS is owned by the Construction Industry Training Board (otherwise known as CITB).

Outcome

On successfully completing the test you will receive a Red CPCS Trained Operator card that is valid for 2 years.

During these 2 years you must work towards achieving your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card.

The course either has new dates in data loading, or is only run as a dedicated or In Company course.
Common Sense Logo
BAM Construction Training Logo
Citrus Training Logo
3B Training Logo
Construction Industry Training Providers Logo
Health Life and Safety Logo
MI Construction Training Logo
Innov8 Training Logo
OM Safety Training Logo
Construction Skills People Logo
Harris Safety Training Logo
First Response Training Logo
KeyOstas Logo
OMS Logo
Tala Training Logo
PRS Health and Safety Training
SSG Training and Consultancy Logo
Safety Training Services Logo
Lighthouse Training Logo
The Building Safety Group Logo
Kentec Training Logo
NTSS logo
Frinton Training logo
The Safety Maintenance Company logo
PC Workshops logo
Zero Harm Training logo
Risk Health and Safety logo
Sibbald Training logo
UTN Training logo
Collective Safety Solutions logo
RRC International Logo
JJH Logo
SaFA Logo
Telephone Hotline (footer image)

Telephone Hotline

01933 233884

(Monday to Friday - 8:00am to 5:30pm).

© 2024 Book My Course Limited. All rights reserved

Home | About Us | Contact Us | FAQs | Privacy Policy | Terms & Conditions | Site Map | News / Articles | Cookie Policy