COURSE FINDER

Booking Enquiry

CPCS Training (A09 and A31) Combined Ride On Roller and Forward Tipping Dumper

£1495 per delegate

Duration: 5 days

Trainer: C221IM

Pre-requisites: Candidates must have completed the CSCS Health, Safety and Environment test for Operatives within the past two years. 

Course Aims:

To provide thorough practical and theory training in operating a Forward Tipping Dumper and Ride on Roller, to enable the candidate to competently and safely carry out the role and pass the CPCS Theory and Practical Tests. 

Course Content: 

- Carrying out pre start and running checks. 
- Set the Dumper for site & road travel. 
- Travel over differing types of terrain, including rough undulating ground both loaded & unloaded. 
- Travel up & down substantial inclines loaded & unloaded. 
- Position dumper to receive loads. 
- Comply with loading procedures. 
- Discharge loads into trenches & over edges. 
- Place machine in and out of service condition 
- Explain loading and unloading procedures on & off of Transporter 
- Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
- Name and explain the purpose of principle components, the basic construction, controls and terminology. 
- Confirm with Manufacturer’s requirements as per the operators handbook, other types of information source and the relevant regulations and legislation.
- Undertake all pre-use checks.
- Configure and ready for site travel.
- Travel over rough, undulating ground, substantial inclines and level surfaces.
- Manoeuvre in confined spaces.
- Configure and set for compacting duties.
- Explain actions required for hazards, underground and overhead services.
- Compact loose granular materials to specification.
- Compact in straight lines and around radii.
- Compact supported and unsupported edges.
- Explain the principles, requirements and techniques of good compaction.
- Carry out shut down and securing procedures.
- Explain the loading and unloading procedures for machine transporting.

Duration of Training: 5 days 

Test: To achieve the Red CPCS Trained Operator Card candidates must pass both the CPCS Theory Test and the Practical Test. 

NVQ Plant Operations and CPCS Competence Card: 

Once you have achieved your Red CPCS Trained Operator Card it lasts for 2 years. During these 2 years you must work towards and achieve your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card. 

Your Enquiry


Please enter your enquiry details below and leave the rest to us. Need different dates or venue? No problem! Please remember to include:
- Preferred dates
- Preferred location(s)


Your Details


What happens next?
Once you have clicked above and sent us your enquiry, our team of advisors will then review your specific needs and email the details that best suit you. We may need to contact you to clarify requirements prior to processing the enquiry.
  • 1UPACCESS Logo
  • Gold Cross Training Services Logo
  • BAM Construction Training Logo
  • Citrus Training Logo
  • 3B Training Logo
  • Astutis Logo
  • Construction Industry Training Providers Logo
  • MecSafe Logo
  • Health Life and Safety Logo
  • CSM Services Logo
  • MI Construction Training Logo
  • Innov8 Training Logo
  • BSI Training Logo
  • OM Safety Logo
  • TotalComms Training Logo
  • SDA Safety Logo
  • Construction Skills People Logo
  • Phoenix Health and Safety Logo
  • Complete Health and Safety Logo
  • Courtley Health and Safety Logo
  • Harris Safety Training Logo
  • First Response Training Logo
  • Construction Training Academy Logo
  • Alliance Learning Logo
  • Le Breton Training Logo
  • Murphy Logo
  • ALS Safety Logo
  • KeyOstas Logo
  • Libben Health and Safety Logo
  • Compass Management Solutions Logo
  • Global Management Academy Logo
  • Illumine Logo
  • Corporate Risk Systems Logo
  • ATC Risk Management Logo
  • CCAS Health and Safety Logo
  • MGM Training Logo
  • ROSPA Logo
  • PJH Safety Training Logo
  • OMS Logo
  • Tala Training Logo
  • PRS Health and Safety Training
  • Mainport Training
  • SSG Training and Consultancy Logo
  • RB Services Logo
  • Safety Training Services Logo
  • Clarkson Evans Training Logo
  • Lighthouse Training Logo
  • MST Solutions Logo
  • SWL Training Logo
  • The Building Safety Group Logo
  • ProSafety Logo
  • Genesys Training Logo
  • Total Training Solutions Logo
  • Kentec Training Logo
  • Total Electrical Training logo
  • NTSS logo
  • C&C Training Logo
  • Safe Life Logo
  • IQMS Logo
  • Frinton Training logo
  • UCT logo
  • Envesca logo
  • The Safety Maintenance Company logo
  • Arthur Adams logo
  • APT Health and Safety logo
  • Sandwell Training Association logo
  • PC Workshops logo
  • Zero Harm Training logo
  • R2 Training logo
  • Whites forklift training logo
  • Risk Health and Safety logo
  • Wise Global Training logo
  • Smallpeice Enterprises logo
  • Sibbald Training logo
  • Highlander logo
  • Total Construction Training logo
  • e-testing logo
  • UTN Training logo
  • 1st Line Defence logo
  • Ideal IT training logo
  • PQMS Training logo
  • Paradise Training logo
  • Collective Safety Solutions logo
  • C&C Training Logo
  • Purple Cow Logo
  • Bradley Group New Logo
  • Construction Training Academy UK
  • IMC Pro Solutions Logo
  • Dorset Health and Safety Logo
  • COTS Logo
  • Hunter Training Solutions
  • Behavioural Safety
  • Mount Anvil Training
  • Randr Training Services
  • Safety & Training Logo
  • Talking Safety Logo
  • Total Protection Logo

Telephone Hotline

01933 233884

(Monday to Friday - 8:00am to 5:30pm).

© 2017 Book My Course Limited. All rights reserved

Home | About Us | Contact Us | FAQs | Privacy Policy | Terms & Conditions | Site Map | News / Articles | Cookie Policy