COURSE FINDER

CPCS Training (A77) - Telescopic Handler 360 Slew Course - Experienced Worker

£1305 per delegate. This may be less for special offers on specific course dates and in-company training courses

Duration: 3 days

Trainer: M323AB

Need course dates or locations to suit you? CLICK HERE TO SEND ENQUIRY...

Introduction:


Our CPCS A77 Telehandler 360 slew training course is designed to provide operators with sufficient telehandler 360 slew training which will enable them to competently and safely carry out the role of a 360 telehandler operator and pass the CPCS theory/practical assessments.

Eligibility: Candidates must have a valid health, safety and environment test for operatives (OPS) within the past 2 years (also referred to as the CSCS touch screen test). 

Machine & Videos:

Candidates attending our CPCS A77 Telehandler 360 Slew courses will be trained and tested on our brand new Magni RTH 6.30 SH. This innovative machine boasts a range of features including a very intuitive and user friendly touch screen display which is used to manage the whole machine. 

We also have a selection of videos for CPCS A17 Telehandler training which are applicable to parts of the 360 Slew Telehandler training course. These videos provide candidates with step by step instructions on how to execute successful activities such as slope work, high lift and stacking / destacking. 

Learning Outcomes:
Through a combination of targeted 360 slew telehandler training and experience, an individual with the 360° telehandler will be able to:

- Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
- Manoeuvre in confined spaces. Follow given signals. Configure & set for lifting, loading & transferring duties.
- Lift & place suspended & fork-mounted loads under blocked, free-on-wheels & pick-and-carry duties. 
- Maintain safe working areas.
- Name & explain the purpose of principal components, the basic construction, controls & terminology
- Attach & remove various attachments, including hoist-rope for the movement of suspended loads.
- Lift, transfer & place fixed-hook suspended loads upto max extension, at full working height & using full slewing capabilities.
- Conform with manufacturer requirements and relevant regulations/legislation. Undertake all pre-use checks
- Lift & remove various loads up to full extension and working height. Transfer & place loads accurately.
- Lift, transfer & place hoist-rope suspended loads upto max extension, at full working height & using full slewing capabilities.
- Travel over level surfaces with & without loads, on rough, undulating ground and inclines.
- Explain basic principles of the slinging of loads, and incorrect methods for attaching suspended loads.
- Explain how stability is affected by travelling with extended boom & rotated upper structure. - Maintain safe working situations.

Activity Instructions (A77):

- Complete all manufacturer’ pre-start and running checks and prepare the excavator for travel
- *Forks* Lift load & place at ground level at an indicated point using full reach (horizontal) of the telehandler.
- *Hoist Rope* Place load onto the vehicle bed. Lift load at max radius and slew through 200° & land load within 2m of machines max radius.
- Prepare and set the telehandler for each lift. Fit the relevant attachment.
- *Forks* Lift load & reverse in a straight line for at least 20m, passing through a restriction at the end of the run.
- *Hoist Rope* Lift load & simulate a concrete pouring exercise by travelling the load in a straight line (min 6m) and land load at given place.
- *Forks* Travel up & down the slope, over rough terrain & pass through a chicane. Stop & restart on incline (loaded).
- *Suspended Loads* Lift & place load at given point below ground level or behind a structure. - Create stack at given location.
- *Hoist Rope* Position machine so that stabiliser footprint is 2m from base of tower & lift load (75% radius), slew 90° & place on tower.
- *Forks* High lift & retrieve load. Lorry loading & unloading. Stack 3 loads vertically & destack.
- *Hoist Rope* Lift load from min to max radius in relation to load. Lift load & reverse for 10m and pass through a restriction.
- Remove the hook / hoist rope & return the machine ready for fork-use. Park the machine & carry out shut-down & securing procedures.
 
Certification: Upon successful completion of the course, candidates will receive a CPCS Trained Operator 'Red' card which is valid for two years. 
The course either has new dates in data loading, or is only run as a dedicated or In Company course.
  • Corps Construct Logo
  • Common Sense Logo
  • GFT Logo
  • Samten Consulting Logo
  • Universal Construction Logo
  • 1UPACCESS Logo
  • BAM Construction Training Logo
  • Citrus Training Logo
  • 3B Training Logo
  • Construction Industry Training Providers Logo
  • Health Life and Safety Logo
  • MI Construction Training Logo
  • Innov8 Training Logo
  • BSI Training Logo
  • OM Safety Training Logo
  • TotalComms Training Logo
  • SDA Safety Logo
  • Construction Skills People Logo
  • Phoenix Health and Safety Logo
  • Harris Safety Training Logo
  • First Response Training Logo
  • Alliance Learning Logo
  • ALS Safety Logo
  • KeyOstas Logo
  • Libben Health and Safety Logo
  • Global Management Academy Logo
  • CCAS Health and Safety Logo
  • ROSPA Logo
  • PJH Safety Training Logo
  • OMS Logo
  • Tala Training Logo
  • PRS Health and Safety Training
  • SSG Training and Consultancy Logo
  • RB Services Logo
  • Safety Training Services Logo
  • Clarkson Evans Training Logo
  • Lighthouse Training Logo
  • The Building Safety Group Logo
  • Total Training Solutions Logo
  • Kentec Training Logo
  • Total Electrical Training logo
  • NTSS logo
  • Frinton Training logo
  • Envesca logo
  • The Safety Maintenance Company logo
  • APT Health and Safety logo
  • PC Workshops logo
  • Zero Harm Training logo
  • R2 Training logo
  • The Bradley Group logo
  • Risk Health and Safety logo
  • Wise Global Training logo
  • Total Training Company Logo
  • Sibbald Training logo
  • Total Construction Training logo
  • UTN Training logo
  • Collective Safety Solutions logo
  • GreEnergy Logo
  • RRC International Logo
  • JJH Logo
  • SaFA Logo
Telephone Hotline (footer image)

Telephone Hotline

01933 233884

(Monday to Friday - 8:00am to 5:30pm).

© 2024 Book My Course Limited. All rights reserved

Home | About Us | Contact Us | FAQs | Privacy Policy | Terms & Conditions | Site Map | News / Articles | Cookie Policy