COURSE FINDER

CPCS Training (A59) - 360 Degree Excavator/Digger Course above 10 tonnes - Foundation/Novice including CSCS Touch Screen Test

£1505 per delegate. This may be less for special offers on specific course dates and in-company training courses

Duration: 5 days

Trainer: T387CT

Need course dates or locations to suit you? CLICK HERE TO SEND ENQUIRY...

Course Aims:

 
The CPCS A59 course aims to provide the candidate with a thorough practical and theory training in operating a 360 degree Excavator in order to to enable the candidate to pass the CPCS Theory and Practical Tests.

Course Content: 
 
Through a combination of targeted training and experience, an individual with a 360 excavator will be able to:

- Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
- Name and explain the purpose of principle components, the basic construction, controls and terminology.
- Confirm with Manufacturer’s requirements as per the operators handbook, other types of information source and the relevant regulations and legislation.
- Undertake all pre-use checks.
- Configure and ready for travel (site and highway – where applicable).
- Travel over rough, undulating ground, steep inclines and level surfaces.
- Manoeuvre in confined spaces.
- Configure and set for excavating duties.
- Explain actions required for hazards, underground and overhead services.
- Excavate differing types of excavations in various types of ground.
- Grade, spread and level ground and materials.
- Place materials into transporting vehicles and hoppers.
- Attach and remove buckets.
- Lift, move and place basic slung loads.
- Carry out shut down and securing procedures.
- Explain the loading and unloading procedures for machine transporting.

Course Requirement: 
 
Candidates must have passed the CSCS Health, Safety and Environment touchscreen test for Operatives within the past two years.
 
All visitors must report to reception on arrival and follow site safety rules at all times.

There are no catering facilities on site, so delegates need to provide their own lunch. There are tea and coffee facilities available.

Candidates must bring and wear their PPE on site for plant testing. They must also bring signature and photographic identification as required for all testing.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Examination Board: 
 
The Construction Plant Competence Scheme (CPCS) is recognised by the UK Contractors Group (UKCG) and Major Home Builders Group (MHBG) as the preferred card to comply with codes of practice for competence and certification. It was launched in 2003 to help them comply with regulations and requirements and aims to apply common standards for all plant operators.

CPCS is owned by the Construction Industry Training Board (otherwise known as CITB).

Assessment: 
 
To achieve the Red CPCS Trained Operator Card candidates must pass both the CPCS Theory Test and the Practical Test.

Re-qualification Information: 
 
Once you have achieved your Red CPCS Trained Operator Card it lasts for 2 years.

During these 2 years you must work towards and achieve your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card.
The course either has new dates in data loading, or is only run as a dedicated or In Company course.
  • Corps Construct Logo
  • Common Sense Logo
  • GFT Logo
  • Samten Consulting Logo
  • Universal Construction Logo
  • 1UPACCESS Logo
  • BAM Construction Training Logo
  • Citrus Training Logo
  • 3B Training Logo
  • Astutis Logo
  • Construction Industry Training Providers Logo
  • Health Life and Safety Logo
  • MI Construction Training Logo
  • Innov8 Training Logo
  • BSI Training Logo
  • OM Safety Training Logo
  • TotalComms Training Logo
  • SDA Safety Logo
  • Construction Skills People Logo
  • Phoenix Health and Safety Logo
  • Harris Safety Training Logo
  • First Response Training Logo
  • Alliance Learning Logo
  • ALS Safety Logo
  • KeyOstas Logo
  • Libben Health and Safety Logo
  • Global Management Academy Logo
  • CCAS Health and Safety Logo
  • ROSPA Logo
  • PJH Safety Training Logo
  • OMS Logo
  • Tala Training Logo
  • PRS Health and Safety Training
  • SSG Training and Consultancy Logo
  • RB Services Logo
  • Safety Training Services Logo
  • Clarkson Evans Training Logo
  • Lighthouse Training Logo
  • The Building Safety Group Logo
  • Total Training Solutions Logo
  • Kentec Training Logo
  • Total Electrical Training logo
  • NTSS logo
  • Frinton Training logo
  • Envesca logo
  • The Safety Maintenance Company logo
  • APT Health and Safety logo
  • PC Workshops logo
  • Zero Harm Training logo
  • R2 Training logo
  • The Bradley Group logo
  • Risk Health and Safety logo
  • Wise Global Training logo
  • Total Training Company Logo
  • Sibbald Training logo
  • Total Construction Training logo
  • UTN Training logo
  • Collective Safety Solutions logo
  • GreEnergy Logo
  • RRC International Logo
  • JJH Logo
  • SaFA Logo
Telephone Hotline (footer image)

Telephone Hotline

01933 233884

(Monday to Friday - 8:00am to 5:30pm).

© 2021 Book My Course Limited. All rights reserved

Home | About Us | Contact Us | FAQs | Privacy Policy | Terms & Conditions | Site Map | News / Articles | Cookie Policy