COURSE FINDER

CPCS Training (A17) - Telescopic Handler Course - Foundation/Novice

£1095 per delegate. This may be less for special offers on specific course dates and in-company training courses

Duration: 4 days

Trainer: T387CT

Need course dates or locations to suit you? CLICK HERE TO SEND ENQUIRY...

Course Aims:

The CPCS A17 course aims to provide the candidate with a thorough practical and theory training in operating a Telescopic Handler in order to to enable the candidate to pass the CPCS Theory and Practical Tests.

Course Content:

Through a combination of targeted training and experience, an individual with a telescopic handler will be able to:

- Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
- Name and explain the purpose of principle components, the basic construction, controls and terminology.
- Confirm with Manufacturer’s requirements as per the operators handbook, other types of information source and the relevant regulations and legislation.
- Undertake all pre-use checks.
- Configure and ready for travel (site and highway).
- Travel over rough, undulating ground, steep inclines and level surfaces – loaded and unloaded.
- Manoeuvre in confined spaces (with and without loads).
- Configure and set for lifting and transferring duties.
- Explain actions required for hazards, underground and overhead services.
- Lift and remove various loads up to full extension and working height of the telescopic handler.
- Transfer and place loads accurately at given locations.
- Place and remove loads from a vehicle.
- Maintain safe working situations.
- Maintain safe and tidy working areas.
- Carry out shut down and securing procedures.
- Explain the loading and unloading procedures for machine transporting.

Course Requirement:

Candidates must have successfully completed the CSCS Health, Safety and Environment touchscreen test for Operatives within the past two years.

All visitors must report to reception on arrival and follow site safety rules at all times.

There are no catering facilities on site, so delegates need to provide their own lunch. There are tea and coffee facilities available.

Candidates must bring and wear their PPE on site for plant testing. They must also bring signature and photographic identification as required for all testing.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Examination Board:

The Construction Plant Competence Scheme (CPCS) is recognised by the UK Contractors Group (UKCG) and Major Home Builders Group (MHBG) as the preferred card to comply with codes of practice for competence and certification. It was launched in 2003 to help them comply with regulations and requirements and aims to apply common standards for all plant operators.

CPCS is owned by the Construction Industry Training Board (otherwise known as CITB).

Assessment:


To achieve the Red CPCS Trained Operator Card candidates must pass both the CPCS Theory Test and the Practical Test.

Re-qualification Information:


Once you have achieved your Red CPCS Trained Operator Card it lasts for 2 years.

During these 2 years you must work towards and achieve your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card.
Telephone Hotline 01933 233884

Enter a location to find distance

Location Region Start Date Days Price ex. VAT    
Redditch Midlands Mon 31 Jul 17 This course runs over four consecutive days, start date as indicated. 4 £1095 + VAT BOOK ENQUIRE
Redditch Midlands Mon 7 Aug 17 This course runs over four consecutive days, start date as indicated. 4 £1095 + VAT BOOK ENQUIRE
Redditch Midlands Mon 14 Aug 17 This course runs over four consecutive days, start date as indicated. 4 £1095 + VAT BOOK ENQUIRE
Uxbridge London All Areas, London South, London West, South Central England, South East Mon 21 Aug 17 This course runs over four consecutive days, start date as indicated. 4 £1195 + VAT BOOK ENQUIRE
Redditch Midlands Mon 28 Aug 17 This course runs over four consecutive days, start date as indicated. 4 £1095 + VAT BOOK ENQUIRE
Redditch Midlands Mon 4 Sep 17 This course runs over four consecutive days, start date as indicated. 4 £1095 + VAT BOOK ENQUIRE
Redditch Midlands Mon 11 Sep 17 This course runs over four consecutive days, start date as indicated. 4 £1095 + VAT BOOK ENQUIRE
Uxbridge London All Areas, London South, London West, South Central England, South East Mon 18 Sep 17 This course runs over four consecutive days, start date as indicated. 4 £1195 + VAT BOOK ENQUIRE
Redditch Midlands Mon 25 Sep 17 This course runs over four consecutive days, start date as indicated. 4 £1095 + VAT BOOK ENQUIRE
Courses found 1 to 9 of 9 1
  • 1UPACCESS Logo
  • BAM Construction Training Logo
  • Gold Cross Training Services Logo
  • Citrus Training Logo
  • 3B Training Logo
  • Astutis Logo
  • Construction Industry Training Providers Logo
  • MecSafe Logo
  • Health Life and Safety Logo
  • CSM Services Logo
  • MI Construction Training Logo
  • Innov8 Training Logo
  • BSI Training Logo
  • OM Safety Training Logo
  • TotalComms Training Logo
  • SDA Safety Logo
  • Construction Skills People Logo
  • Phoenix Health and Safety Logo
  • Complete Health and Safety Logo
  • Courtley Health and Safety Logo
  • Harris Safety Training Logo
  • First Response Training Logo
  • CTA logo
  • Alliance Learning Logo
  • Le Breton Training Logo
  • Murphy Logo
  • ALS Safety Logo
  • KeyOstas Logo
  • Libben Health and Safety Logo
  • Compass Management Solutions Logo
  • Global Management Academy Logo
  • SMTS Logo
  • Corporate Risk Systems Logo
  • ATC Risk Management Logo
  • CCAS Health and Safety Logo
  • MGM Training Logo
  • ROSPA Logo
  • PJH Safety Training Logo
  • OMS Logo
  • Tala Training Logo
  • PRS Health and Safety Training
  • Mainport Training Logo
  • SSG Training and Consultancy Logo
  • RB Services Logo
  • Safety Training Services Logo
  • Clarkson Evans Training Logo
  • Lighthouse Training Logo
  • MST Solutions Logo
  • SWL Training Logo
  • The Building Safety Group Logo
  • ProSafety Logo
  • Genesys Training Logo
  • Total Training Solutions Logo
  • Kentec Training Logo
  • Total Electrical Training logo
  • NTSS logo
  • C&C Training Logo
  • Safe Life Logo
  • IQMS Logo
  • Frinton Training logo
  • UCT logo
  • Envesca logo
  • The Safety Maintenance Company logo
  • Arthur Adams logo
  • APT Health and Safety logo
  • Sandwell Training Association logo
  • PC Workshops logo
  • Zero Harm Training logo
  • R2 Training logo
  • Whites forklift training logo
  • The Bradley Group logo
  • Risk Health and Safety logo
  • Wise Global Training logo
  • Smallpeice Enterprises logo
  • Total Training Company Logo
  • Sibbald Training logo
  • Highlander logo
  • Total Construction Training logo
  • e-testing logo
  • UTN Training logo
  • 1st Line Defence logo
  • Ideal IT training logo
  • PQMS Training logo
  • Paradise Training logo
  • Collective Safety Solutions logo

Telephone Hotline

01933 233884

(Monday to Friday - 8:00am to 5:30pm).

© 2017 Book My Course Limited. All rights reserved

Home | About Us | Contact Us | FAQs | Privacy Policy | Terms & Conditions | Site Map | News / Articles | Cookie Policy